Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-353001.png)
Camshaft Position Sensor: Service and Repair
Removal
2AZ-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: REMOVAL
REMOVAL
1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Removal
3. REMOVE CAMSHAFT POSITION SENSOR
(a) Disconnect the camshaft position sensor connector.
(b) Remove the bolt and the camshaft position sensor.
