Matrix FWD L4-2.4L (2AZ-FE) (2009)
WINDOW / GLASS: REAR POWER WINDOW SWITCH: REMOVAL
REMOVAL
1. REMOVE REAR DOOR ARMREST UPPER BASE PANEL See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Disassembly
2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws and remove the rear power window regulator switch
assembly.
Installation
WINDOW / GLASS: REAR POWER WINDOW SWITCH: INSTALLATION
INSTALLATION
1. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Engage the 2 claws to install the rear power window regulator switch assembly.
2. INSTALL REAR DOOR ARMREST UPPER BASE PANEL See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Reassembly