Matrix FWD L4-2.4L (2AZ-FE) (2009)
(b) Remove the generator rotor assembly.
7. REMOVE GENERATOR DRIVE END FRAME BEARING
(a) Remove the 4 screws and bearing retainer plate from the generator drive end frame.
(b) Using SST and a hammer, tap out the generator drive end frame bearing from the generator drive end frame.
SST: 09950-60010
09951-00250
SST: 09950-70010
09951-07100
Reassembly
2AZ-FE BATTERY / CHARGING: GENERATOR: REASSEMBLY
REASSEMBLY
1. INSTALL GENERATOR DRIVE END FRAME BEARING
(a) Using SST and a press, press in a new generator drive end frame bearing.
SST: 09950-60010
09951-00250
SST: 09950-70010
09951-07100
(b) Fit the tabs on the bearing retainer plate into the cutouts on the generator drive end frame to install the generator retainer plate.