Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-1535001.png)
Starter Relay: Testing and Inspection
2AZ-FE STARTING: RELAY: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT STARTER RELAY
(a) Check the resistance.
(1) Using an ohmmeter, measure the resistance between the terminals.
Standard Resistance:
If the result is not as specified, replace the relay.
2. INSPECT ACC RELAY
(a) Check the resistance.
(1) Using an ohmmeter, measure the resistance between the terminals.
Standard Resistance:
If the result is not as specified, replace the relay.
