Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-1557001.png)
Neutral Safety Switch: Adjustments
U250E AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: ADJUSTMENT
ADJUSTMENT
1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Loosen the 2 bolts of the park/neutral position switch and move the shift lever to N.
(b) Align the groove with the neutral basic line.
(c) Hold the switch in position and tighten the 2 bolts.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(d) After adjustment, perform the switch inspection See: Testing and Inspection/On-Vehicle Inspection.
