Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-1678005.png)
(j) Install the front seed sensor and the front flexible hose to the front shock absorber with the bolt.
Torque: 29 Nm (296 kgf-cm, 21 ft-lbf)
(k) Install the front wheel.
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)
(l) Check the camber.
If the measured value is not within the specification, calculate the required adjustment amount using the formula below.
Camber adjustment amount = center value of the specified range - measured value.
Check the combination of installed bolts. Select appropriate bolts from the table below to adjust the camber to the specified values.
HINT: Try to adjust the camber to the center of the specified values.
