toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Components|Page 5742 > < Components|Page 5740
Page 1
background image

Front Steering Knuckle: Service and Repair
Removal

AXLE AND DIFFERENTIAL: STEERING KNUCKLE: REMOVAL

REMOVAL

HINT:
-

Use the same procedure for the RH side and LH side.

-

The procedure listed below is for the LH side.

1. REMOVE FRONT WHEEL
2. REMOVE FRONT AXLE SHAFT NUT (for 2AZ-FE) See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft

Assembly/Service and Repair/Removal and Replacement/Removal

3. REMOVE FRONT AXLE SHAFT NUT (for 2ZR-FE) See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft

Assembly/Service and Repair/Removal and Replacement/Removal

4. SEPARATE FRONT SPEED SENSOR See: Suspension/Ball Joint/Service and Repair/Removal
5. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY See: Wheels and Tires/Wheel Fastener/Service and Repair/Front Axle Hub

Bolt/Replacement

6. REMOVE FRONT DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Front

Brake/Removal

7. SEPARATE TIE ROD END SUB-ASSEMBLY (for 2WD) See: Steering Gear/Service and Repair/Removal
8. SEPARATE TIE ROD END SUB-ASSEMBLY (for 4WD) See: Steering Gear/Service and Repair/Removal
9. SEPARATE FRONT LOWER SUSPENSION ARM See: Suspension/Ball Joint/Service and Repair/Removal

10. REMOVE FRONT AXLE ASSEMBLY See: Suspension/Wheel Hub/Service and Repair/Front Axle Hub/Removal
11. REMOVE FRONT LOWER BALL JOINT See: Suspension/Ball Joint/Service and Repair/Removal
12. REMOVE FRONT AXLE HUB HOLE SNAP RING See: Suspension/Wheel Hub/Service and Repair/Front Axle Hub/Removal
13. REMOVE FRONT AXLE HUB SUB-ASSEMBLY See: Suspension/Wheel Hub/Service and Repair/Front Axle Hub/Removal
14. REMOVE FRONT DISC BRAKE DUST COVER See: Suspension/Wheel Hub/Service and Repair/Front Axle Hub/Removal
15. REMOVE STEERING KNUCKLE

(a) Place the front axle hub bearing inner race (outside) on the front axle hub bearing.

(b) Using SST and a press, remove the front axle hub bearing from the steering knuckle.

SST: 09527-17011
SST: 09950-60010
09951-00640
SST: 09950-70010
09951-07100

Components|Page 5742 > < Components|Page 5740