Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-1785011.png)
(c) Using a socket hexagon wrench (6 mm), secure the rear shock absorber piston rod and tighten the nut.
Torque: 39 Nm (398 kgf-cm, 29 ft-lbf)
(d) Remove SST from the rear coil spring.
NOTE: Do not use an impact wrench. It will damage SST.
9. INSTALL REAR SHOCK ABSORBER WITH COIL SPRING
(a) Install the 3 nuts.
Torque: 80 Nm (816 kgf-cm, 59 ft-lbf)
(b) Temporarily tighten the rear shock absorber with coil spring to the rear No. 1 suspension arm assembly with the bolt and nut.
(c) Install the rear No. 1 suspension arm assembly with the 3 bolts.
Torque: 65 Nm (663 kgf-cm, 48 ft-lbf)
10. INSTALL REAR FLOOR SIDE MEMBER BRACE (for LH Side) See: Control Arm/Service and Repair/Rear Lower Arm/Installation
11. INSTALL REAR STABILIZER LINK ASSEMBLY
12. INSTALL REAR WHEEL
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)
13. INSTALL SIDE DECK TRIM PANEL ASSEMBLY LH (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
14. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH (for LH Side) See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Installation
15. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Installation
16. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Installation
17. INSTALL REAR SEAT SIDE GARNISH LH (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
18. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
19. INSTALL SIDE DECK TRIM PANEL ASSEMBLY RH (for RH Side without Woofer) See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Installation
20. INSTALL SIDE DECK TRIM PANEL ASSEMBLY RH (for RH Side with Woofer) See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Installation
21. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH (for RH Side with Woofer) See: Body and Frame/Interior Moulding /
