Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-1785012.png)
Trim/Headliner/Service and Repair/Installation
22. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Installation
23. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Installation
24. INSTALL REAR SEAT SIDE GARNISH RH (for RH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
25. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for RH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
26. INSTALL REAR DECK TRIM COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
27. INSTALL LUGGAGE COMPARTMENT TRAY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
28. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR See: Restraint Systems/Seat Belt Systems/Child Restraint/Child Seat Tether
Attachment/Service and Repair/Installation
29. INSTALL DECK FLOOR BOX RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
30. INSTALL DECK FLOOR BOX LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
31. INSTALL JACK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
32. INSTALL JACK CARRIER ASSEMBLY
33. INSTALL NO. 2 DECK BOARD See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
34. INSTALL DECK BOARD ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
35. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
36. INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly/Installation
37. INSTALL REAR SEATBACK INNER HINGE COVER (for LH Side) See: Body and Frame/Seats/Service and Repair/Rear Seat
Assembly/Installation
38. INSTALL REAR SEATBACK OUTER HINGE COVER (for LH Side) See: Body and Frame/Seats/Service and Repair/Rear Seat
Assembly/Installation
39. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)
40. INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly/Installation
41. INSTALL REAR SEATBACK INNER HINGE COVER (for RH Side) See: Body and Frame/Seats/Service and Repair/Rear Seat
Assembly/Installation
42. INSTALL REAR SEATBACK OUTER HINGE COVER (for RH Side) See: Body and Frame/Seats/Service and Repair/Rear Seat
Assembly/Installation
43. CONNECT REAR SEAT CENTER OUTER BELT ASSEMBLY (for RH Side) See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and
Repair/Rear Seat Outer Belt Assembly/Installation
44. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (for RH Side)
45. INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side)
46. INSTALL REAR SEAT CUSHION ASSEMBLY See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly/Installation
47. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH (for LH Side) See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Installation
48. INSTALL REAR DOOR SCUFF PLATE LH (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
49. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH (for RH Side) See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Installation
50. INSTALL REAR DOOR SCUFF PLATE RH (for RH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
51. STABILIZE SUSPENSION
(a) Lower the vehicle.
(b) Bounce the vehicle up and down several times to stabilize the suspension.
52. FULLY TIGHTEN REAR SHOCK ABSORBER WITH COIL SPRING
(a) Fully tighten the bolt and nut.
Torque: 210 Nm (2141 kgf-cm, 155 ft-lbf)
NOTE: The final torque must be applied under standard vehicle height conditions.
53. INSPECT AND ADJUST REAR WHEEL ALIGNMENT See: Alignment/Service and Repair/Rear Wheel Alignment (for Double Wishbone
Type Suspension).
Disposal
