Matrix FWD L4-2.4L (2AZ-FE) (2009)
Replacement
AXLE AND DIFFERENTIAL: REAR AXLE HUB BOLT: REPLACEMENT
REPLACEMENT
HINT:
-
Use the same procedure for the RH side and LH side.
-
The procedure listed below is for the LH side.
1. REMOVE REAR WHEEL
2. REMOVE FRONT UPPER CONSOLE BOX (for Torsion Beam Type Suspension) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Lower Instrument Panel/Removal
3. LOOSEN PARKING BRAKE CABLE (for Torsion Beam Type Suspension) See: Brakes and Traction Control/Disc Brake System/Service and
Repair/Removal and Replacement/Rear Brake (for Torsion Beam Type Suspension)/Removal