Matrix FWD L4-2.4L (2AZ-FE) (2009)
(a) Temporarily install the 2 nuts and 2 washers to the rear axle hub bolt as shown in the illustration.
(b) Using SST and a brass bar or an equivalent tool to hold the hub and bearing assembly, remove the rear axle hub bolt.
SST: 09628-10011
29. INSTALL REAR AXLE HUB BOLT (for Double Wishbone Type Suspension)
(a) Install a washer and nut to a new rear axle hub bolt as shown in the illustration.
(b) Using a brass bar or an equivalent tool to hold the hub and bearing assembly, install the rear axle hub bolt by tightening the nut.
30. APPLY HIGH TEMPERATURE GREASE (for Double Wishbone Type Suspension) See: Brakes and Traction Control/Parking Brake
System/Service and Repair/Reassembly
31. INSTALL PARKING BRAKE SHOE LEVER (for Double Wishbone Type Suspension) See: Brakes and Traction Control/Parking Brake
System/Service and Repair/Reassembly
32. INSTALL NO. 1 PARKING BRAKE SHOE RETURN TENSION SPRING (for Double Wishbone Type Suspension) See: Brakes and Traction
Control/Parking Brake System/Service and Repair/Reassembly
33. INSTALL PARKING BRAKE SHOE ADJUSTING SCREW SET (for Double Wishbone Type Suspension) See: Brakes and Traction
Control/Parking Brake System/Service and Repair/Reassembly
34. INSTALL PARKING BRAKE SHOE LEVER (for Double Wishbone Type Suspension) See: Brakes and Traction Control/Parking Brake
System/Service and Repair/Reassembly
35. INSTALL NO. 2 PARKING BRAKE SHOE HOLD DOWN COMPRESSION SPRING (for Double Wishbone Type Suspension) See: Brakes
and Traction Control/Parking Brake System/Service and Repair/Reassembly
36. INSTALL PARKING BRAKE SHOE STRUT (for Double Wishbone Type Suspension) See: Brakes and Traction Control/Parking Brake
System/Service and Repair/Reassembly
37. INSTALL NO. 1 PARKING BRAKE SHOE HOLD DOWN COMPRESSION SPRING (for Double Wishbone Type Suspension) See: Brakes
and Traction Control/Parking Brake System/Service and Repair/Reassembly
38. INSTALL NO. 2 PARKING BRAKE SHOE RETURN TENSION SPRING (for Double Wishbone Type Suspension) See: Brakes and Traction
Control/Parking Brake System/Service and Repair/Reassembly
39. INSTALL NO. 3 PARKING BRAKE SHOE RETURN TENSION SPRING (for Double Wishbone Type Suspension) See: Brakes and Traction
Control/Parking Brake System/Service and Repair/Reassembly
40. CHECK PARKING BRAKE INSTALLATION (for Double Wishbone Type Suspension) See: Brakes and Traction Control/Parking Brake
System/Service and Repair/Reassembly
41. INSTALL REAR DISC (for Double Wishbone Type Suspension) See: Brakes and Traction Control/Disc Brake System/Service and
Repair/Overhaul/Rear Brake (for Double Wishbone Type Suspension)/Reassembly
42. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY (for Double Wishbone Type Suspension)