Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-1278005.png)
(b) Remove the 4 nuts and shift lever assembly.
Installation
U250E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: INSTALLATION
INSTALLATION
1. INSTALL SHIFT LEVER ASSEMBLY
NOTE: Check that the park/neutral position switch and the shift lever are in neutral.
(a) Install the shift lever assembly with the 4 nuts.
Torque: 12 Nm (122 kgf-cm, 9 ft-lbf)
(b) Connect the 2 connectors and 2 clamps to the shift lever assembly.
2. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Turn the nut of the transmission control cable 180° counterclockwise. While holding the nut in place, push in the stopper until it clicks twice.
