Matrix FWD L4-2.4L (2AZ-FE) (2009)
(b) Install the outer part of the transmission control cable to the shift lever retainer. Check that the spring is positioned at "A" and push in the
stopper.
HINT: If the stopper cannot be pushed in, slightly turn the nut clockwise and then push in the stopper again.
(c) Push the 2 claws together at the top of the transmission control cable lock piece. While holding the 2 claws together, push the 2 lugs on the
bottom of the lock piece toward each other and upward to pull out the lock piece.