Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-1300001.png)
Wiring Harness: Testing and Inspection
U250E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSPECTION
INSPECTION
1. INSPECT TRANSMISSION WIRE
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
HINT: If the resistance is out of the specified range with the ATF temperature shown in the table above, the driveability of the vehicle may
decrease.
If the resistance value is not as specified, replace the transmission wire.
