Matrix FWD L4-2.4L (2AZ-FE) (2009)
21. SEPARATE FRONT AXLE ASSEMBLY RH
HINT: Use the same procedure for the LH side.
22. REMOVE MANUAL TRANSMISSION CASE PROTECTOR (for Manual Transaxle)
(a) Remove the 2 bolts and manual transmission case protector.
23. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
(a) Using SST, remove the front drive shaft assembly LH.
SST: 09520-01010
SST: 09520-24010
09520-32040
NOTICE:
-
Do not damage the oil seal.
-
Do not damage the inboard joint boot.
-
Do not drop the drive shaft.
24. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH (for 2WD)
(a) Using a screwdriver, remove the bearing bracket hole snap ring.
(b) Remove the bolt and front drive shaft assembly RH from the drive shaft bearing bracket.
NOTE: Do not damage the boot or oil seal.
25. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH (for 4WD)