Matrix FWD L4-2.4L (2AZ-FE) (2009)
(b) Using SST and a hammer, tap in the oil seal.
SST: 09608-32010
SST: 09950-70010
09951-07200
Standard depth:
3.0 to 4.0 mm (0.1181 to 0.1575 in.)
NOTE: Do not damage the oil seal lip.
9. INSTALL FRONT DRIVE SHAFT ASSEMBLY See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal and
Replacement/Installation.
10. ADD MANUAL TRANSAXLE OIL See: Fluid - M/T/Service and Repair
11. INSPECT MANUAL TRANSAXLE OIL See: Fluid - M/T/Testing and Inspection
12. INSTALL ENGINE UNDER COVER LH
13. INSTALL ENGINE UNDER COVER RH