Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-1352001.png)
Shift Cable: Service and Repair
Installation
E351 MANUAL TRANSMISSION / TRANSAXLE: TRANSMISSION CONTROL CABLE: INSTALLATION
INSTALLATION
1. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Install the transmission control cable assembly with the 2 nuts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
(b) Install the transmission control cable assembly with the nut.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
(c) Install the 2 transmission control cables to the control cable bracket with 2 new clips*1.
(d) Install the 2 transmission control cables to the transaxle with the 2 clips*2.
