Clutch Pedal Position Sensor/Switch Service and Repair Components | Matrix FWD L4-24L
/Page-1369001.png)
Clutch Pedal Position Sensor / Switch: Service and Repair
Installation
CLUTCH: CLUTCH PEDAL SWITCH: INSTALLATION
INSTALLATION
1. INSTALL CLUTCH PEDAL SWITCH ASSEMBLY
(a) Install the clutch pedal switch assembly to the clutch pedal support sub-assembly with the nut.
Torque: 16 Nm (160 kgf-cm, 12 ft-lbf)
(b) Connect the clutch pedal switch assembly connector.
2. INSPECT CLUTCH PEDAL SWITCH ASSEMBLY See: Clutch/Testing and Inspection/Component Tests and General Diagnostics/Clutch
System
