Matrix FWD L4-2.4L (2AZ-FE) (2009)
WINDOW / GLASS: FRONT PASSENGER SIDE POWER WINDOW SWITCH: REMOVAL
REMOVAL
1. REMOVE FRONT ARMREST UPPER BASE PANEL RH
(a) Using a moulding remover, disengage the clip and 7 claws.
(b) Disconnect the connector and remove the front armrest upper base panel RH.
2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws and remove the power window regulator switch
assembly.
Installation
WINDOW / GLASS: FRONT PASSENGER SIDE POWER WINDOW SWITCH: INSTALLATION
INSTALLATION
1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Engage the 2 claws to install the power window regulator switch assembly.
2. INSTALL FRONT ARMREST UPPER BASE PANEL RH