Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-1158001.png)
Headliner: Service and Repair
REPLACEMENT
HINT: Installation is in the reverse order of the removal. But the installation is indicated only when it has a point.
1. REMOVE FRONT DOOR SCUFF PLATE RH
a. Using a screwdriver, remove the front door inside scuff plate.
HINT: Tape the screwdriver tip before use.
b. Employ the same manner described above to the other side.
2. REMOVE FRONT DOOR SCUFF PLATE LH
3. REMOVE REAR DOOR SCUFF PLATE RH
a. Using a screwdriver, remove the rear door scuff plate RH.
HINT: Tape the screwdriver tip before use.
b. Employ the same manner described above to the other side.
4. REMOVE REAR DOOR SCUFF PLATE LH
5. REMOVE COWL SIDE TRIM BOARD RH
a. Remove the clip.
b. Using a screwdriver, remove the cowl side trim board RH.
HINT: Tape the screwdriver tip before use.
