Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-738002.png)
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
NOTICE: Make sure the sensor tip is clean.
b. Install the sensor harness clamp with the 2 bolts "A" and "B" to the body and shock absorber.
Torque:
Bolt A: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
Bolt B: 29 Nm (296 kgf-cm, 21 ft. lbs.)
c. Connect the speed sensor connector.
d. Connect the speed sensor wire harness clamp to the body.
5. INSTALL FRONT FENDER LINER LH
6. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
7. CHECK ABS SPEED SENSOR SIGNAL
