Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-790001.png)
Parking Brake Lever: Service and Repair
REPLACEMENT
1. REMOVE CONSOLE BOX ASSY REAR
a. Remove the console box insert and console box damper RR.
b. Remove the 4 bolts.
c. Disconnect the connector, and remove the console box assy rear.
2. REMOVE PARKING BRAKE LEVER SUB-ASSY
a. Disconnect the parking brake switch connector from the parking brake switch.
b. Remove the lock nut and adjusting nut from the parking brake cable assy No.1.
c. Remove the 2 bolts.
d. Using a screwdriver, raise the pick on the parking brake lever, and remove the parking brake cable assy No.1 from the parking brake lever.
e. Remove the parking brake lever from the body.
