Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
d. Remove the 8 bolts, wire harness protector, cylinder head cover and gasket.
e. Remove the O-ring from the cylinder head cover.
7. REMOVE FAN AND GENERATOR V-BELT
a. Turn the drive belt tensioner slowly clockwise and loosen it. Then, remove the drive belt and put back the drive belt tensioner little by little
and fix it quietly.
8. REMOVE ENGINE MOUNTING INSULATOR SUB-ASSY RH
a. Set the jack to the engine.
HINT: Place a wooden block between the jack and engine.
b. Remove the 5 bolts, 2 nuts and engine mounting insulator sub-assy RH.