Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-338004.png)
28. SET NO.1 CYLINDER TO TDC/COMPRESSION
a. Turn the crankshaft pulley, and align its groove with timing mark "0" of the timing chain cover.
b. Check that the point marks of the camshaft timing sprocket and VVT timing sprocket are in straight line on the timing chain cover surface as
shown in the illustration.
HINT: If not, turn the crankshaft 1 revolution (360°) and align the marks.
29. REMOVE CRANKSHAFT PULLEY
a. Using SST, remove the pulley bolt.
SST 09213-70011 (09213-70020), 09330-00021
b. Using SST, remove the crankshaft pulley.
SST 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021, 09957-04010)
30. REMOVE V-RIBBED BELT TENSIONER ASSY
HINT: Handle a jack up and down to remove the bolt.
