Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-338013.png)
b. Apply engine oil to the chain tensioner and install it.
Torque: 9.0 Nm (92 kgf-cm, 80 inch lbs.)
NOTICE: When installing the tensioner, set the hook again if the hook release the plunger.
65. INSTALL CRANK POSITION SENSOR
Torque: 9.0 Nm (92 kgf-cm, 80 inch lbs.)
66. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING BRACKET
a. Install the engine mounting bracket with the 4 bolts.
Torque: 49 Nm (500 kgf-cm, 36 ft. lbs.)
67. INSTALL WATER PUMP ASSY
a. Place a new O-ring on the timing chain cover.
b. Install the water pump with the 6 bolts.
Torque: 9.0 Nm (92 kgf-cm, 80 inch lbs.)
HINT: Each bolt length is indicated in the illustration.
68. INSTALL WATER PUMP PULLEY
a. Using SST, install the water pump pulley.
Torque: 15 Nm (153 kgf-cm, 11 ft. lbs.)
SST 09960-10010
