Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-343002.png)
a. Disconnect the fuel hose clamp and 2 PCV hoses from the cylinder head cover.
b. Remove the 2 nuts, bolt and disconnect the No. 3 ventilation hose from the No. 1 ventilation pipe.
c. Disconnect the ventilation No. 1 tube and gasket.
d. Remove the 8 bolts, wire harness protector, cylinder head cover and gasket.
e. Remove the O-ring from the cylinder head cover.
12. REMOVE ENGINE MOUNTING INSULATOR SUB-ASSY RH
a. Set the jack to the engine.
HINT: Place a wooden block between the jack and engine.
b. Remove the 5 bolts, 2 nuts and engine mounting insulator sub-assy RH.
