Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-343009.png)
35. INSTALL CRANKSHAFT PULLEY
a. Align the pulley set key with the key groove of the pulley, and slide on the pulley.
b. Using SST, install the pulley bolt.
SST 09213-70011 (09213-70020), 09330-00021
Torque: 118 Nm (1,203 kgf-cm, 87 ft. lbs.)
c. Turn the crankshaft counterclockwise, and disconnect the plunger knock pin form the hook.
d. Turn the crankshaft clockwise, and check that the slipper is pushed by the plunger.
36. INSTALL CRANK POSITION SENSOR
Torque: 9.0 Nm (92 kgf-cm, 80 inch lbs.)
37. INSTALL COMPRESSOR AND MAGNETIC CLUTCH (W/ AIR CONDITIONER)
38. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING BRACKET
a. Install the engine mounting bracket with the 4 bolts.
Torque: 49 Nm (500 kgf-cm, 36 ft. lbs.)
39. INSTALL WATER PUMP ASSY
a. Place a new O-ring on the timing chain cover.
