Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-386001.png)
Exhaust Pipe: Service and Repair
Removal & Installation and Disassembly & Reassembly
1. REMOVE CONSOLE BOX ASSY REAR
a. Remove console box insert.
b. Remove console box damper RR.
c. Remove 4 bolts from the console box assy rear.
d. Disconnect a connector and remove the console box assy rear.
2. REMOVE OXYGEN NO.2 SENSOR (RR POSITION)
a. Disconnect an oxygen No. 2 sensor connector, as show in the illustration.
b. Remove the oxygen No. 2 sensor from the exhaust pipe assy front, as shown in the illustration.
3. REMOVE OXYGEN NO.2 SENSOR (FR POSITION)
a. Remove a clip and tear off the floor mat.
b. Disconnect the oxygen No. 2 sensor connector.
