Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-386003.png)
11. INSTALL OXYGEN NO.2 SENSOR (RR POSITION)
a. Install the oxygen No. 2 sensor to the exhaust pipe front.
Torque: 44 Nm (450 kgf-cm, 33 ft. lbs.)
b. Connect the oxygen No. 2 sensor connector.
HINT: After installing oxygen No. 2 sensor, check that sensor wire is not twisted. If it is twisted, remove oxygen No. 2 sensor and reinstall it.
12. INSTALL CONSOLE BOX ASSY REAR
a. Connect a connector and install the console box assy rear with 4 bolts.
13. CHECK EXHAUST GAS LEAK
