Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
-
Do not use tools like screwdriver to remove the tube.
-
Cap the open fittings immediately to keep moisture or dirt out of the system.
3. DISCONNECT COOLER REFRIGERANT LIQUID PIPE A
SST 09870-00015
HINT: Disconnect in the same way as the cooler refrigerant suction hose No.1.
4. DISCONNECT HEATER INLET WATER HOSE
a. Using pliers, grip the claws of clip and slide the clip and disconnect the heater inlet water hose.
5. DISCONNECT HEATER OUTLET WATER HOSE
HINT: Disconnect in the same way as the heater inlet water hose.
6. REMOVE INSTRUMENT PANEL SUB-ASSY LOWER
HINT: Refer to the instructions for removal of the instrument panel sub-assy lower.
7. REMOVE INSTRUMENT PANEL LWR PAD INSERT LH
a. Remove the 3 screws and instrument panel LWR pad insert LH.
8. REMOVE INSTRUMENT PANEL LOWER MOUNT BRACKET NO.1 (M/T TRANSAXLE)
9. REMOVE INSTRUMENT PANEL BRACE SUB-ASSY NO.1
a. Remove 2 clips and take up the floor carpet.
HINT: Take up the floor carpet as small as the instrument panel brace sub-assy No.1 can be removed.