Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
15. REMOVE HEATER TO REGISTER DUCT NO.1
a. Remove the 2 clips and heater to register duct No.1.
16. REMOVE DEFROSTER NOZZLE ASSY
a. Release the 3 fitting claws, remove the defroster nozzle assy.
17. DISCONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSY
a. Disconnect the outer cable from the clamp.
b. Disconnect the inner cable and defroster damper control cable sub-assy.
NOTE:
-
Be careful not to bend the cable wire.
-
If the cable wire bends, the air conditioning control assy operationality becomes worse.
18. DISCONNECT AIRMIX DAMPER CONTROL CABLE SUB-ASSY
a. Disconnect the outer cable from the clamp.
b. Disconnect the inner cable and airmix damper control cable sub-assy.