Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-988001.png)
Evaporator Case: Service and Repair
Replacement Part 2
AIR CONDITIONING UNIT ASSEMBLY
26. REMOVE DAMPER SERVO SUB-ASSY
a. Remove the 2 screws and damper servo sub-assy.
HINT: Removing only instrument panel sub-assy upper and heater to register duct No.1 makes it possible and install the damper servo
sub-assy.
27. REMOVE BLOWER W/FAN MOTOR SUB-ASSY
a. Remove the 3 screws and blower w/fan motor sub-assy.
HINT: Removing only the ECM makes it possible and install the blower w/fan motor sub-assy.
28. REMOVE BLOWER RESISTOR
a. Disconnect the connector.
b. Remove the 2 screws and blower resistor
HINT: Removing only the ECM makes it possible and install the blower resistor.
