Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
2. After having finished the connection, check if the pipe and the connector are securely connected by pulling them.
6. CHECK FUEL LEAK
Check that there are no fuel leaks after doing maintenance anywhere on the fuel system.
1. Connect the hand-held tester to the DLC3.
2. Turn the ignition switch ON and hand-held tester main switch ON.
3. Select the active test mode on the hand-held tester.
4. Please refer to the hand-held tester operator's manual for further details.
5. If you have no hand-held tester, connect the positive (+) and negative (-) leads from the battery to the fuel pump connector
6. Check that there are no leaks from any part of the fuel system.
7. Turn the ignition switch to LOCK.
8. Disconnect the hand-held tester from the DLC3.