Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-560005.png)
11. INSTALL THROTTLE BODY ASSY
a. Install a new gasket on the intake manifold, as shown in the illustration.
b. Install the throttle body and accelerator control cable bracket with 2 bolts and 2 nuts.
Torque: 22 N.m (224 kgf.cm, 16 ft.lbf)
c. Connect 2 water by-pass hoses to the throttle body.
d. Connect the PCV hose to the throttle body.
e. Connect the throttle body idle speed control valve assy connector to the throttle body.
f.
Connect the throttle position sensor connector to the throttle body.
12. INSTALL AIR CLEANER CAP SUB-ASSY
a. Install the air cleaner cap.
b. Connect the air cleaner hose No.1.
