Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
Transmission Position Switch/Sensor: Service and Repair
REPLACEMENT
1. REMOVE BATTERY
2. REMOVE BATTERY CARRIER
a. Remove the 4 bolts and battery carrier.
3. DISCONNECT FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT
a. Remove the nut from the control shaft lever.
b. Disconnect the control cable from the control shaft lever.
c. A246E/U341F: Remove the clip and disconnect the control cable from the bracket.
d. U240E: Push the claw of the clip and disconnect the control cable from the bracket.
e. U240E: Remove the clip from the bracket.