Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-1057002.png)
3. REMOVE REAR DOOR OPENING TRIM RH
4. REMOVE REAR DOOR OPENING TRIM LH
5. REMOVE TONNEAU COVER ASSY
6. REMOVE DECK BOARD NO.2
7. REMOVE DECK BOARD SUB-ASSY
8. REMOVE DECK FLOOR BOX REAR
9. REMOVE LUGGAGE COMPARTMENT TRAY
10. REMOVE BACK DOOR WEATHERSTRIP
11. REMOVE DECK TRIM COVER REAR
12. REMOVE REAR SEAT CUSHION ASSY AND REAR SEAT BACK ASSY
13. REMOVE REAR SEAT SIDE GARNISH RH
14. REMOVE REAR SEAT SIDE GARNISH LH
15. REMOVE DECK TRIM SIDE PANEL ASSY RH
16. REMOVE DECK TRIM SIDE PANEL ASSY LH
17. REMOVE REAR SEAT 3 POINT TYPE BELT ASSY OUTER
a. Using a screwdriver, remove the shoulder anchor cover.
HINT: Tape the screwdriver tip before use.
b. Remove the bolt and disconnect the rear seat 3 point type belt assembly outer (shoulder anchor side).
c. Remove the bolt and disconnect the rear seat 3 point type belt assembly RH (floor anchor side).
18. REMOVE REAR SEAT BELT ASSY OUTER CENTER
a. Remove the rear seat back board RH.
b. Remove the rear seat shoulder belt cover.
c. Remove the 2 bolts and rear seat belt assembly outer center.
19. REMOVE REAR SEAT INNER W/CENTER BELT ASSY LH
a. Remove the bolt and the rear seat inner w/center belt assembly LH.
20. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSY RH
a. Remove the 2 bolts and child restraint seat anchor bracket sub-assembly RH.
21. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSY RH
a. Install the child restraint seat anchor bracket sub-assembly RH with the 2 bolts.
Torque: 18.1 N.m (185 kgf.cm, 13.3 ft.lbf)
22. INSTALL REAR SEAT BELT ASSY OUTER CENTER
a. Install the rear seat belt assembly outer center (retractor) with the 2 bolts.
Torque: 41.2 N.m (420 kgf.cm, 30 ft.lbf)
23. INSTALL REAR SEAT BELT ASSY OUTER CENTER
