Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-105001.png)
Wheel Speed Sensor: Service and Repair
Speed Sensor, Front
REPLACEMENT
HINT: Replace the RH side by the same procedure as the LH side.
1. REMOVE FRONT WHEEL
2. REMOVE FRONT FENDER LINER LH
3. REMOVE SPEED SENSOR FRONT LH
a. Disconnect the speed sensor wire harness clamp from the body.
b. Disconnect the speed sensor connector.
c. Remove the 2 clamp bolts holding the sensor harness from the body and shock absorber.
d. Remove the bolt and speed sensor front LH.
NOTICE: Keep on the sensor tip clean.
4. INSTALL SPEED SENSOR FRONT LH
a. Install the speed sensor front LH with the bolt.
