Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
b. Install the starter yoke assy with the 2 through bolts.
Torque: 6.0 N.m (61 kgf.cm, 52 in.lbf)
17. INSTALL REPAIR SERVICE STARTER KIT
a. Apply grease to the plunger and hook.
b. Hang the plunger hook of the repair service starter kit to the drive lever.
c. Install the plunger and return spring.
d. Install the repair service starter kit with the 2 screws.
Torque: 7.5 N.m (80 kgf.cm, 69 in.lbf)
e. Apply grease to the nut of the lead wire.
f.
Connect the lead wire to the terminal with the nut.
Torque: 6.5 N.m (66 kgf.cm, 58 in.lbf)