Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-931006.png)
36. REMOVE RACK GUIDE
a. Using SST, remove the rack guide spring cap nut.
SST 09922-10010
NOTICE: Use SST 09922-10010 in the direction shown in the illustration.
b. Using a hexagon wrench (19 mm), remove the rack guide spring cap.
c. Remove the conical spring, rack guide spring and rack guide.
37. REMOVE POWER STEERING CONTROL VALVE
a. Remove the rack housing cap.
b. Using SST, hold the control valve shaft and remove the self-locking nut.
SST 09616-0011
c. Remove the 2 bolts and power steering control valve.
d. Remove the gasket.
e. To prevent oil seal lip damage, wind vinyl tape around the serrated part of the control valve.
f.
Using a plastic hammer, remove the control valve with oil seal from the control valve housing.
g. Remove the oil seal from the control valve.
