Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
42. REMOVE POWER STEERING CYLINDER TUBE OIL SEAL
a. Using SST and a press, remove the power steering cylinder tube oil seal.
SST 09950-60010 (09951-00260), 09950-70010 (09951-07360)
43. REMOVE POWER STEERING CONTROL VALVE LOWER BEARING
a. Using SST and a press, remove the power steering control valve lower bearing.
SST 09950-70010 (09951-07100)
b. Using SST and a press, remove the power steering control valve center bearing.
44. INSPECT POWER STEERING RACK
a. Using a screwdriver, remove the O-ring from the power steering rack bush sub-assy.
b. Using a dial indicator, check the steering rack for run out and for teeth wear and damage.
Maximum run out: 0.1 mm (0.004 inch)
c. Check the back surface for wear and damage.
45. INSTALL POWER STEERING CONTROL VALVE LOWER BEARING
a. Coat a new bearing with molybdenum disulfide lithium base grease.