Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
c. 4WD: Remove the bolt and 2 nuts, disconnect the transverse engine engine mounting insulator and engine mounting member sub-assy center
from the front suspension crossmember sub-assy.
d. Remove the 4 bolts.
e. Lower the transmission jack, remove the front suspension crossmember sub-assy.
9. REMOVE FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH
a. Remove the 2 bolts, nut and front suspension arm sub-assy lower No.1 LH from the front suspension crossmember sub-assy.
10. TEMPORARY TIGHTEN FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH
a. Install the front suspension arm Embassy lower No. 1 LH, temporarily tighten the 2 bolts and nut.
11. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSY (LH (A/T) POSITION)
a. Lift the front suspension crossmember sub-assy up with a transmission jack.