Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-640009.png)
a. Install the floor shift assy with the 4 nuts.
Torque: 11.8 Nm (122 kgf-cm, 9 ft. lbs.)
HINT: Tighten them in the order, A, B, C and D.
b. Connect the shift lock control ECU connector and indicator lamp wire connector.
c. Connect the wire harness clamp.
35. CONNECT FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT
a. Install the control cable to the shift lever plate.
b. Connect the control cable end to the floor shift assy.
HINT: Install it with the uneven surface facing up.
36. CONNECT FLOOR SHIFT PARKING LOCK CABLE ASSY
