Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-699001.png)
Shift Cable: Service and Repair
Floor Shift Cable Transmission Control Shift Replacement
REPLACEMENT
1. PRECAUTION
NOTICE: Do not open the cover or the case of the ECU and various electrical devices unless absolutely necessary (If the IC terminals are
touched, the IC may be destroyed by static electricity.).
2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. REMOVE FLOOR SHIFT SHIFT LEVER KNOB SUB-ASSY
4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSY CTR
5. REMOVE INSTRUMENT PANEL BOX
6. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER
