Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
2) Temporarily install the 2 bolts.
3) Place a new lock plate and tighten the nut.
Torque: 6.9 Nm (70 kgf-cm, 61 inch lbs.)
4) Temporarily install the control shaft lever.
5) Turn the lever counterclockwise until it stops, then turn it clockwise 2 notches.
6) Remove the control shaft lever.
7) Align the groove with neutral basic line.
8) Hold the switch in position and tighten the 2 bolts.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
9) Using a screwdriver, stake the nut with the lock plate.