Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-1407003.png)
3.
Remove the front door pull handle.
A.
Remove the screw.
B.
Using the plastic pry tool or a screwdriver, remove the door pull handle.
HINT:
Tape the screwdriver tip before use.
4.
Remove the front armrest base panel upper.
^
With Power Door Lock: Remove the armrest base panel from the trim board by using the plastic pry tool or the taped screwdriver.
a.
Disconnect the door lock switch connector.
b.
Remove the door lock switch from the base panel.
^
Without Power Door Lock: Remove the armrest base panel from the trim board by using the plastic pry tool or the taped screwdriver.
5.
Remove the front door lower frame bracket garnish by using the taped screwdriver to disengage the clip and claw.
6.
Remove the front door trim board sub-assembly.
A.
Remove the screw.
B.
Using the taped screwdriver, disengage the seven (7) clips and pull the trim board upward to remove it.
