Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
f.
Install the rear wiper motor & bracket assy with shaft cover assy with the 2 nuts.
Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)
9. INSTALL W/ WASHER PACKING NUT REAR WIPER LINK PIVOT
a. Using a deep socket wrench (24 mm), install the w/washer packing nut rear wiper link pivot with a nut.
Torque: 1.0 N.m (71 kgf.cm, 62 in.lbf)
10. INSTALL REAR WIPER ARM ASSY
a. Scrape off the serration part of the wiper arm with a round file or equivalent.
b. Clean the rear wiper pivot serration with the wire brush.