MR2 L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1991)
If the pulley cannot be removed by hand, use two screwdrivers.
HINT: Position shop rags as shown to prevent damage.
29. Remove oil pump pulley.
Using SST 09616-30011, remove the nut and pulley.
If the pulley cannot be removed by hand, use two screwdrivers.
HINT: Position shop rags as shown to prevent damage.
29. Remove oil pump pulley.
Using SST 09616-30011, remove the nut and pulley.