MR2 L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1991)
Windshield Washer Switch: Service and Repair
Removal and Installation
1.
On models with airbag, disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2.
On models less airbag, disconnect battery ground cable.
3.
On all models, remove steering wheel as described under STEERING SUSPENSION CHASSIS AND BODY
COMPONENTS/COMPONENT REPLACEMENT AND REPAIR PROCEDURES/STEERING WHEEL.
4.
Remove steering column upper and lower covers.
5.
Disconnect combination switch connectors, remove combination switch.
6.
Reverse procedure to install. Arm airbag system as previously described.