MR2 L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1991)
/Page-161001.png)
Wiper Switch: Service and Repair
Combination Switch
Removal/Installation
1.
On models with airbag, disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2.
On models less airbag, disconnect battery ground cable.
3.
On all models, remove steering wheel as described under STEERING SUSPENSION CHASSIS AND BODY
COMPONENTS/COMPONENT REPLACEMENT AND REPAIR PROCEDURES/STEERING WHEEL.
4.
Remove steering column upper and lower covers.
5.
Disconnect combination switch connectors, remove combination switch.
6.
Reverse procedure to install. Arm airbag system as previously described.
Service
Fig. 6 Combination Switch Type A
