MR2 L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1991)
/Page-962001.png)
Ball Joint: Testing and Inspection
Fig. 5 Ball Joint Inspection
1.
Raise front of vehicle and place wooden block with height of 7.09-7.87 inches under one front tire.
2.
With wheels in straight ahead position, lower vehicle until coil spring has about half a load on it. Place jack stands under vehicle for safety, Fig.
5.
3.
Move lower arm up and down and ensure ball joint has no play.
